Part Number- MMKEN
Kendall® GT-1 High Performance Motor Oil with Liquid Titanium protection additive is a high-quality, conventional automotive engine oil designed for use in gasoline-fueled passenger cars and light trucks that do not require an ILSAC GF-5 oil for warranty coverage. The SAE 20W-50 and SAE 50 viscosity grades are especially recommended for use in high-performance street engines and competition engines, including both gasoline- and alcohol-fueled racing vehicles.
GT-1 High Performance with Liquid Titanium is formulated to provide excellent wear protection, to minimize sludge and varnish formation, and to resist viscosity and thermal breakdown, even in severe service. It also protects against rust and bearing corrosion, and is highly resistant to foaming. All viscosity grades are fortified with our exclusive Liquid Titanium protection additive for extra protection against engine wear. This additive enhancement provides increased engine protection by forming a strongly bonded titanium shield on the surface of critical engine parts, which reduces friction and wear and can help extend engine life.
GT-1 High Performance with Liquid Titanium, SAE 20W-50, also contains a boosted level of zinc dialkyldithiophosphate (ZDDP) additive to provide additional wear protection and enhanced oxidation resistance in the most demanding applications. It is particularly recommended for use in turbocharged engines and in high-performance engines with flat-tappet camshafts, especially during the critical break-in period.
Applications
• Gasoline-fueled passenger cars, light trucks and sport utility vehicles that do not require an ILSAC GF-5 oil for warranty coverage
• Older vehicles and small four-stroke cycle gasoline engines found in lawn mowers and garden tractors, where the engine manufacturer specifies monograde engine oil (SAE 30, 40)
• Competition engines and high-performance street engines (SAE 20W-50, 50)-1® High Performance Motor Oil with Liquid Titanium®
** The average small block will take 5.5 quartz so you will need to buy 6 bottles**
Typical Properties
SAE Grade
Specific Gravity @ 60°F Density, lbs/gal @ 60°F Color, ASTM D1500
Flash Point (COC), °C (°F) Pour Point, °C (°F) Viscosity, Kinematic
cSt @ 40°C
cSt @ 100°C
Viscosity Index
Cold Cranking Viscosity, cP
@ (°C)
High-Temp/High-Shear Viscosity, cP @ 150°C Sulfated Ash, ASTM D874, wt %
Total Base Number (TBN), ASTM D2896 Phosphorus, wt %
Titanium, wt %
Zinc, wt %
Health and Safety Information
10W-40
0.872 7.26 3.0 227 (441) -36 (-33)
110 15.6 150 6,700 (-25) 3.9 0.96 8.0 0.077 0.010 0.085
20W-50
0.880 7.33 3.0 230 (446) -30 (-22)
160 18.4 129 5,900 (-15) 4.7 0.99 8.0 0.109 0.010 0.120
30
0.882 7.35 3.5 250 (482) -33 (-27)
95.0 11.5 109 — — 3.4 1.1 9.3 0.089 0.010 0.098
40
0.884 7.36 3.5 254 (489) -28 (-18)
128 13.6 102 — — 3.9 1.1 9.3 0.089 0.010 0.098
50
0.889 7.40 4.0 260 (500) -28 (-18)
202 18.6 102 — — 5.1 1.1 9.3 0.089 0.010 0.098
