Brand: FORD SB
COMP CAMS VAVLE SPRINGS
Manufacturer's Part Number:
942-16
Part Type:
VAVLE SPRINGS
Valve Spring Style:
Standard
Number of Springs Per Valve:
Dual
Maximum Valve Lift (in.):
0.665 in.
Retainers Included:
No
Outside Diameter of Outer Spring (in.):
1.509 in.
Coil Bind Height (in.):
1.175 in.
Damper Spring Included:
Yes
Spring Rate (lbs/in.):
347 lbs./in.
Inside Diameter of Outer Spring (in.):
1.125 in.
Inside Diameter of Inner Spring (in.):
0.697 in.
Locks Included:
No
Valve Stem Seals Included:
No
Valve Springs Coated:
No
Quantity:
Sold as a set of 16.
COMP Cams Valve Springs
Valve springs are one of the most critical and overlooked components in your engine. They must be matched to your cam in order for the engine to reach its full potential. It does absolutely no good to install a cam that will perform up to 8,000 rpm if you do not have the correct springs. Use the only valve springs that will give the recommended spring pressure with the valve both on the seat and at maximum lift. COMP Cams valve springs are offered in single and dual styles to meet your cam requirements.
Installed Height (in.):
1.900 in.
Seat Pressure at Installed Height (lbs.):
112 lbs.
Open Height (in.)(application):
1.200 in.
Open Pressure (lbs.):
347 lbs.
