Check out Mustang Maniac’s SALE ITEMS here!

Not just mustang parts but various SALE items along with all our BLEMISHED items

Model Year: All Models
Change

Back 69-95 351W Big End Set +10 Mahle

Made in United States
69-95 351W Big End Set +10 Mahle
69-95 351W Big End Set +10 Mahle

69-95 351W Big End Set +10 Mahle

 

MAHLE / CLEVITE MMCB831P8 Specifications
Bearing Material TM-77
Bearing O.D. or Housing Bore (max.) 2.4273
Bearing O.D. or Housing Bore (min.) 2.4265
Bearing Series P
Max. Length 0.7260
Max. Wall 0.0577
Standard Shaft Diameter (max.) 2.3111
Standard Shaft Diameter (min.) 2.3103
Unit of Measure Inches
Vertical Oil Clearance (max.) 0.0026
Vertical Oil Clearance (min.) 0.0001
P Series (Tri-Metal); Set
P-Series parts are the oldest series of Clevite® high performance bearings. Both rods and mains have high crush for maximum retention, and a reduced overlay thickness to prevent overlay fatigue, sometimes referred to as hen tracking.

Use the P-Series rod bearings where extremely high RPM's cause severe rod bore close-in. This is typically indicated by nearly full parting line to parting line shaft contact with bearings having less eccentricity. The rod bearings in this series typically have the greatest amount of eccentricity. Rod bearings also use a hardened steel back for added strength and resistance to fretting.

Clevite® TriMetal™ engine bearings have been the industry standard since the first patent on the cast, copper, lead composition decades ago. These points are just a few of the advantages Clevite's TriMetal™ engine bearings:
  • Seizure Resistance - Clevite TriMetal™ bearings have as much as 40% better seizure resistance than competitors' engine bearings.
  • Load Capacity - Clevite TriMetal™ bearings can withstand over 60% higher loads for extended periods compared to competitor bearings.
  • Embedability & Conformability - The overlay on a TriMetal™ bearing offers a superior surface for forgiveness, offering additional protection that can be extremely beneficial in an engine that is poorly maintained.
  • Durability - Clevite TriMetal™ bearings not only exceed light vehicle OE durability requirements of 150,000 miles, they also exceed heavy vehicle OE durability requirements of 300,000 miles.
  • Even all tri-metal engine bearings are not the same. If you want the highest quality, strongest, and original TriMetal™ bearings, ask for Clevite Engine Bearings.
The letters at the end of each part number indicate a specific feature of the part.

Example:

Part # CB1234HXNK: H = High Performance, X = .001" more oil clearance than standard, N = Narrowed for greater crankshaft fillet clearance, K = TriArmor™ coating applied to the bearing surface.

 

£109.95 + VAT
£131.94 inc. VAT