POWER SEAT CONVERSION KIT, Increases rear travel of seat by 1.25 inches over manual slides (more leg room). Kit supplies parts for one bucket seat. Bolts to the factory locations on the floorboard and seat frame. Only adds 1/8 inch to overall seat height, Black anodized frame. Seat belts cannot be mounted to the track. Customer must use factory floor and B-Pillar mounting points. Requires customer to run a 14 gauge 12v fused wire and ground wire. Customer provides own power seat switch or purchases the optional seat switch kit. Same distance of forward seat adjustment as manual slides. Includes new seat track mounting plates, seat frame mounting bolts and track to floorboard mounting bolts. Customer reuses the floorboard mounting nuts. Manufacturer supplies a limited lifetime warranty to the original purchaser. Tested to work with stock seats. This conversion has not been tested with aftermarket seats.